Location: Home > Product > Atomizer > T-VCT


Size:               22*73.5mm
Material:          303-Stainless/Silica glass
Technology:     Polishing/High temperature decal(golden)(silver)
Weight:           68g

Resistance:      0.2-0.5 Ohm

E-liquid Capacity:  6.0ml

Atomizer coil: T-BDC coil / T-BVC coil / RBA coil.



1. Material : All tank is made of stainless steel and glass .
2. Coil type: 0.5 ohm (single coil, 10-35W), 0.2-0.5 ohm(dual coil ,10-50W), Coil material is Environmentally Friendly Organic Cotton ,no healthy risk and best flavor.
3. Top filling design :Easy to use , but before you fill it ,you must make sure to close the e-liquid hole totally before you open the upper cap ,than it won,t be any leaking problems caused by air pressure .
4. Big capacity: it holds up to 6ml liquid, you can vape all day without filling.
5. Wattage Range:10W-35W ( first a few hits must be at 25W or below because the coil needs to suck the liquid in slowly and fully ,after that 30W-35W is ok ,but we suggest 25W-30W, it provides the best vaping experience )
6 . Life term: If you use 2 or more kinds of flavors with the same coil , the coil may last 10 ml liquid or less because the Chemical reaction that 2 flavors cause , and if you use one flavor all the time ,the coil will last 50ml-100ml .
7. Outside liquid holes adjustment : You can adjust the liquid hole in order to use 100%VG to 100%PG liquid , If you taste any dry hits ,please make sure to check the liquid holes are open, and if it keeps coming ,then you may check the coil ,if the cotton has been burnt ,then you need a new coil.

Tip: Sometimes a few drops of liquid outside is normal because sub ohm tank needs big air flow , wipe it out with tissue ,if you follow the user’s manual ,it can avoid the leaking problem.